Dual stage regulator Custom co2 system, industrial grade parts Harris 9296 ideal

Description

Planted aquarium Custom CO2 system, Industrial grade 2 Stages regulator & parts.
-This double stage custom co2 system, all parts were individually chosen, then built and tested by bettatail (member of TPT).
-It will be part of the exhibition of your planted tank while the industrial grade components will ensure many years of pleasant and trouble free service.
-I've been researching and building custom co2 systems since 2011, now the parts you see in my custom made co2 systems are among the best industrial grade components that I could offer.
-The systems are built with industrial diaphragm valves double stage regulators, not normal aquarium co2 regulators
that are
Pin/spring valves design. Double stage ensure no
Out Put Pressure Rise
which cause EOTD and lost of fauna in the tank. Diaphragm valves guarantee less issue with the valve leaking and always ensure on/close and hold steady the desired output pressure at each valve stage.
-Solenoid is part of the system that enable a timer/automation control of the co2 injection. Reliable solenoids with extremely low power consumption, s
mall orifice and
high on/off life cycles,
are good candidates because the co2 flow rate is extremely low in our application, but these solenoids are not available in commercially ready co2 systems due to high cost, we have to find and put them on the co2 systems ourselves.
-High precision metering valve, this is the part that control and hold steady the desired co2 flow rate. Higher the precision, easier the adjustment capability and less flow rate drift issue. Some of the industrial grade metering valve involved in these DIY type high end co2 systems, are with original price tags same as the co2 systems that built with the valves.
Three major components of this co2 system:
1.
Harris 9296
heavy duty brass stock double stage pressure regulator.  input pressure max 3000 psi, output pressure 0 - 45 psi, this is a good condition refurbished industrial grade double stage diaphragm pressure regulator.
2.
Burkert 6011
solenoid, brass valve body, 4 watts low power consumption, warm to the touch, low risk of heat damage, 0 - 87 psi, 24V DC, power adapter included.
3.
Ideal valves
series 2 angle pattern with vernier handle, brass. Its precision is not as good as the series 1 model, but CO2 flow rate is easily manageable compare to the normal aquarium needle valves.
This system works with various co2 fusion methods: regular or inline diffuser/atomizer, co2 reactors, calcium reactors, ph controller..
This system works with both freshwater planted tank and saltwater reef tank, but recommend for freshwater use because it is bare brass, for saltwater a chrome plated or stainless steel co2 system stands better chance against surface corrosion.
How to use this system
:
Normal operating procedure for a pressure regulator, but a couple things worth mentioned to avoid mistakes, especially if it is first time to use a pressurized co2 cylinder:
1. make sure the washer in place when connect to a co2 cylinder/tank, hand tight then wrench tight the cga320 nut.
2. the pressure adjust handle is at close position(all the way
counter
clockwise) while charging the system with pressurized co2.
3. open the co2 cylinder valve slowly.
How to care for this system
No special care.
In the package
:
Pictured CO2 system
AC/DC power adapter
co2 hose, co2 cylinder/tank and diffuser
are not included
.
recommend industrial grade polyurethane hose for co2, do not use silicon air hose(high co2 leak rate under pressure).
international buyer must contact seller before making purchase.
If there is special customized adjustment request or any other question, please contact seller.
To our pleasant transaction,Please read the sales policies carefully before you bid,thanks
CO2 Magnetic Valve
Fit for the 6mm pipe (inner diameter 4mm and outer diameter 6mm)
Power: AC220V or AC110, 50/60Hz
6.0/4.5VA
100% ED
Temp raise: 35 centigrade
CO2 Regulator valve
1. Precise structure, durable stainless steel inner part with aluminum alloy to release CO2 by fine tuning.
2. Special metal-grinded surface, light weight, easy to operate.
3. Ergonomically design, easy to install without using any tool.
4. Connection part can be rotated at will, easy to read the meter without directional limit.
CO2 CHECK VALVE & Bubble Counter
High quality, Made of aluminum alloy
1.With bubble counter.
2.For suction filters with water suction below.
3.No waste gas problems.
4.Easy to mount.
Payment
We are able to accept through PayPal only!
Please make payment within 7 days after auction ended. Item purchased in different currencies, invoice will be sent to customers that purchase items in multiple currencies.
Please offer home or mobile phone (because delivery requirement,please tell us your contact phone number) after paying.thanks
Shipping & Handling
We ship to worldwide,shiping address must match your paypal address
.
All orders are shipped via Air Mail (If you need tracking number,Please contact us for price) We will ship immediately within 2-3 business days upon receiving your payment is cleared.Normally your order will arrive within 10-25 days(USA ,CA,AU,UK and most Europe).Due to variation of postal service in different areas, some areas may take a little longer.We are unable to take any responsibtily for any custom delay or tax. Reason is because transit time is highly depended and provided by Postal Service (except weekends and holidays)
If you have not received the item in the post in 30 days, please contact us directly, we will assist you to resolve the issue.
Feedback Policy
DSR is a strictly judge standard what is useful for our service. If you have any problem before you want to leave us low DSR ,please to contact us freely. We will try our best to help you to solve all the problems and apprehension.
Our purpose is to make sure the profits of our customers.
If you have any questions please be free to contact me first ,we will try the best to resolve for you.
In order to provide you a better service, please treat the transaction fairly. Feedback is our life, before you leave a neutral or negative feedback, please do contact us to get a better solution. We will handle every situation case by case carefully.
Return Policy
We accept refund or exchange. please email us within 14 days after you received the item , then return back to us. The refund amount don't include the shipping& handing cost. Item must be return back to us as in almost same condition as it sent, before refund is issued .
Connect us
Please feel free to eamil with any questions through eBay's "Contact Seller" button. We do our best to answer all emails within on business day.
Our business hours are 9:00am - 21:pm (China Time),Monday through saturday.
If you have any questions, ask me freely with Ebay message. !
Thank you for shopping!
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.